ALP's Long-range Oceangoing Tug Named ALP Striker
ALP Striker (Photo: ALP)
Naming ceremony (Photo: ALP)
ALP Striker (Image: ALP)
ALP Striker, named at a ceremony held named on May 13, 2016, is the first of four ultra-long distance towing and anchor handling vessels for ALP Maritime Services, each with a bollard pull of approximately 300 metric tons.
The vessels of the SX157 design are a part of the ALP Future class. Service speed is 13 knots, while their top speed is 19 knots. With a fuel capacity of more than 3,500 cubic meters, they can tow at full power for 45 days, sufficient for nonstop Trans-Atlantic/Indian, Pacific Ocean towing operations without fuel calls. The vessels are constructed by Niigata Shipbuilding & Repair, Japan.
The vessels were developed especially for this project in close collaboration between ship designer Ulstein Design & Solutions AS and ship owner ALP Maritime Services, the latter a subsidiary of Teekay Offshore Partners L.P.
A vessel of this type typically tow oil rigs, or FPSOs, from the building yards to the installation site at the oil field. In addition, these vessels are outfitted with DP2 and anchor handling capacity in order to assist during the installation/hook-up phase for the towed objects. The vessels are 88.9 meters long and 21 meters wide.
At the time of the contract signing, the oceangoing tug market was a new design area to Ulstein, and the largest single contract so far for Ulstein Design & Solutions AS.
When developing the design Ulstein had to ensure that each vessel has the sufficient bollard pull and operational reliability to handle even the heaviest tows by only two vessels. Environment and fuel efficiency have also been important criteria. The vessels are classed with DNV’s Clean Design and Ice Class 1B notations, which allow operation also in restricted zones. Additionally, they are equipped as anchor handling vessels including stern roller, a three-drummed winch with 400-ton hoisting capacity, and with chain lockers for rig chain. The ships have a comfortable and spacious accommodation for 35 persons reflecting long periods at sea.
Ulstein is also responsible for the deliveries of main components, such as engines, thrusters and propellers, winch, power distribution and thruster drives, control system and communication system.
The three sister vessels are in different phases of construction. Vessel number two, the ALP Defender, will be the next one to be completed, while vessel number three, the ALP Sweeper, was launched on May 7, 2016. The final vessel will be named the ALP Keeper.
Main characteristics:
Long Distance Towing
High bollard pull: For the towing of very large floating objects
Also equipped for: Anchor Handling, positioning, mooring
Dynamic Positioning Class II
Worldwide work
Optimal seagoing characteristics (ULSTEIN X-BOW)
Fuel efficient
Clean Design
Comfort Class Comf-V (3)
Ice Class 1B
Fire Fighting (FiFi II)
Cargo deck area: 550 m2
Four engines, capacity 18,000 kW / 600 rpm
Deck cargo 2,400 tons - 10t/m2 Max
Deadweight 4,250 tons
