Marine Link
Thursday, December 12, 2024

Seaspan Opts for SCHOTTEL Again

Maritime Activity Reports, Inc.

July 24, 2019

  • Photo courtesy of SCHOTTEL
  • Photo: SCHOTTEL
  • Photo courtesy of SCHOTTEL Photo courtesy of SCHOTTEL
  • Photo: SCHOTTEL Photo: SCHOTTEL

SCHOTTEL has been chosen as propulsion supplier for two new build Ro-Ro ferries under construction at Damen Shipyards Mangalia, Romania. 

Each of the vessels ordered by Canadian Seaspan Ferries Corporation will be propelled by two SCHOTTEL Combi Drives and two SCHOTTEL Transverse Thrusters. The new ferries will join the company’s first two hybrid vessels, “Seaspan Swift” and “Seaspan Reliant”, which were commissioned just over two years ago. Seaspan Ferries currently operates a fleet of seven ferries out of four terminals in British Columbia, Canada.

Optimal maneuverability
Each of the Vard Marine designed vessels is powered by two natural gas fueled engines with 209 m³ storage onboard plus 2 MWh batteries for driving the SCHOTTEL propulsion package. The package itself consists of two Combi Drives type SCD 560 STP with an input power of 2,600 kW and a propeller diameter of 2.6 m which will allow a design speed of 16 knots. Beyond this, two type STT 1 FP bow thrusters (each of 550 kW) ensure precise and high maneuverability. These can be mounted and dismounted while the vessel is afloat.

Increasing efficiency, reducing fuel consumption
With the SCHOTTEL exclusive Combi Drive, the electric motor is integrated vertically into the rudderpropeller, resulting in a highly efficient and quiet electric variant of the well-proven SRP and STP propulsion units. By sharing the load between two propellers, the twin propeller concept increases propulsion efficiency and reduces fuel consumption over single propeller systems.

Maximal displacement of 6,750 tonnes each
With a capacity of 1,034 lane meters each, both new ferries will be servicing the commercial route from Vancouver Island to the lower mainland. The 149 m long and 26 m wide ferries will carry a range of cargo, but will primarily haul semi-trailers as well as automobiles transporting everything from daily essentials to electronics, lumber, pulp and paper. Both Ro-Ro ferries are also capable of carrying hazardous cargos, construction/logging equipment and special project cargo.

Damen Shipyards will start construction of the vessels at its Mangalia Shipyard in Romania later this year. The new vessels are scheduled to go into operation in 2021.



Subscribe for
Maritime Reporter E-News

Maritime Reporter E-News is the maritime industry's largest circulation and most authoritative ENews Service, delivered to your Email five times per week