Video: Reefer RoRo Ship Design Rebooted
Expanding on the Reefer RoRo Ship design release in September last year, naval architects group Knud E. Hansen A/S has continued the development of the new Reefer RoRo Ship design with version II.
A video showcasing the design is available here.
According to the designer, the ship, which is intended for worldwide operation as a Reefer RoRo Ship in the banana trade, emphasizes low box rates by fast and efficient cargo handling in port, which enables slow steaming.
In version II, the bridge and engine have been positioned forward to optimize the cargo handling on the under deck areas. Noting large back haul cargo potential to Central America, the designer has also increased the height of the four inside decks to 4.5 m to allow for general RoRo cargo. On the back haul, the ship is hence an ordinary RoRo ship.
With the new design, the ship has a capacity of about 12,500 HC pallets – 6,800 HC pallets on cassettes inside the ship and other 5.700 HC pallets in refrigerated containers on the weather deck. The ship can be loaded, resp. discharged in 12 hours. On the back haul, the ship has 4,400 lane meters, equivalent to about 900 – 1,000 cars, but with the new design general project cargo can be transported as well.
Loading in two ports in Central America and discharging in Antwerp plus one port more, and back haul to Central America, the ship is burning an average of 42 tons HFO per day. The box rate is calculated to $2.50 per banana carton full liner terms equivalent on a long term charter.