Propellers News

Kongsberg Embarks on Hybrid Conversion of Swedish Operator’s Ferry

Kongsberg Maritime has secured a project to convert the double ended car ferry MF Hamlet to emission-free battery powered operation.The ferry, operated by Öresundlinjen, on the route between Helsingør, Denmark, and Helsingborg, Sweden, will see a major upgrade including installation of large battery packs and new permanent magnet motors for the azimuth thrusters.The primary goals of the project include achieving zero emissions, enabling full electric operation with batteries, and having mechanical propulsion redundancy.The ferry will utilize high-voltage charging in port…

ProZero Tapped to Distribute Swamp Shark Drives

ProZero International, a workboat supplier in the Danish Tuco Marine Group, has been appointed as the exclusive distributor of the innovative American “Swamp Shark Drives propulsion systems” across Europe, West Africa, Kenya, and additional regions. This partnership brings a revolutionary solution to the maritime industry, particularly for operators in challenging environments such as mangrove areas, shallow waters, and debris-filled rivers.The Swamp Shark Drive is an advanced surface drive system engineered for seemless performance in demanding conditions.

Drydock Avoided with In-Water Dry Environment Repairs

Subsea Global Solutions has successfully executed a complex in-water thruster installation and rudder bushing replacement, eliminating the need for drydocking and ensuring the vessel remained on schedule.Originally planned for drydock, the repairs were expedited in-water when drydocking availability did not align with the vessel’s operational needs. Subsea Global Solutions was selected based on its extensive experience with in-water technical repairs and its history of successful projects for the client.The project was executed in Portland…

Schottel Inks Propulsion Supply Deal for Portuguese Navy’s Newbuild

Schottel has been awarded a contract to supply propellers and thruster for a Multi-Purpose Support Ship (MPSS) being built by Damen for the Portuguese Navy.For the main propulsion, Schottel will deliver two electrically powered EcoPeller type SRE 560 azimuth thrusters with an input power of 2,600 kW eachTo enhance maneuverability and DP capabilities, the newbuild will be equipped with a SCHOTTEL TransverseThruster type STT 3 FP (800 kW).With this thruster configuration, the 107-metre long and 20-meter-wide ship will reach a free sailing speed of 15.5 knots…

Schottel's SRP-D Efficiency Confirmed

The increased performance of the SCHOTTEL RudderPropeller Dynamic SRP-D has once again been confirmed by external sources. At the request of the Dutch Damen Group, the Maritime Research Institute Netherlands (MARIN) carried out extensive research to demonstrate the added value of the SRP-D for Commissioning Service Operation Vessels (CSOV).While an earlier study had already demonstrated a reduced DP footprint and fuel savings, Damen’s latest research focused particularly on propulsion efficiency during thruster interactions.

Schottel to Equip Polish Frigates with Transverse Thrusters

Schottel ahs secured a contract to supply Polish MIECZNIK-class multi-role frigates with transverse thrusters.Each of the MIECZNIK-class multi-role frigates, being built by PGZ Stocznia Wojenna in Poland, will be fitted with a shock-enhanced STT 4 with an input power of 925 kW and a propeller diameter of 2.0 metres.The entire scope of supply of the STTs comprises a combined system with motor and frequency-driven soft starter, which represents a complete functional unit from a single source for the customer.Each STT will be equipped with Schottel LeaCon…

France's First Hydrogen-Electric Powered Fishing Training Vessel Ready to Set Sail

The LPMA: Maritime and Aquaculture Professional School of Bastia will on November 15, 2024, inaugurate France's first hydrogen-electric powered fishing training vessel, dubbed Alba, which was designed by a MAURIC-led consortium.Alba vessel has been specifically designed to include fishing training capabilities such as longline and seine techniques.The vessel can accommodate up to 12 students and 2 instructors (crew).With an overall length of 19.95 meters, the maximum length allowed by the LPMA specifications…

Schottel Bags Components Order for 27 US Coast Guard Vessels

Schottel has been selected by Birdon America to supply components to 27 vessels of the U.S. Coast Guard Waterways Commerce Cutter (WCC) program.For this program, U.S. Coast Guard prime contractor Birdon America is designing the cutters and is expected to construct 16 River Buoy Tenders (WLR) and 11 Inland Construction Tenders (WLIC).The cutters will be built at Birdon’s recently acquired Bayou La Batre shipyard in Alabama. Up to four cutters are expected to be delivered annually over the course of the next eight years…

Kongsberg Maritime to Equip 10-Strong Fleet of Capital Offshore’s PSVs

Kongsberg Maritime has secured $73.3 million contract from Fujian Mawei Shipbuilding in China to supply range of equipment for a new fleet of 10 platform supply vessels (PSVs) being built for Greek shipowner Capital Offshore.Under the contract, Kongsberg Maritime will supply all propulsion, automation, and energy systems for the 95-metre vessels of MMC 897 CD design.The Kongsberg Maritime electrical system on these vessels will enable optimal operation through the Energy Storage System (ESS).

Study Highlights Need to Reconsider Fixed Sea-Margin for Gate Rudder Concept

A study published by Norbert Bulten, Product Performance Manager at Wärtsilä, has demonstrated that “there is more in life than the straight-sailing, calm water condition.”The research was carried out within the EU-funded CHEK project and involved full-scale CFD simulations that focused on the impact of rudder steering and vessel motion.The study compared a gate rudder concept to a conventional semi-spade rudder for a Kamsarmax bulker.Typically, a rudder is placed behind the propeller, where the movable part can be a part (semi-spade) or the complete rudder section (full-spade).

Schottel to Propel World’s First Autonomous Electric Ferries

A series of four zero-emission and autonomous ferries, to be built by Turkish Tersan shipyard for Norwegian ferry operator Fjord1, will be propelled by Schottel’s EcoPellers.The double-ended vessels will be the first of their kind in the world, with Norwegian HAV Design tasked to deliver the ship design and an engineering package.Two electrically driven Schottel EcoPellers type SRE 340 will be installed in each of the 120 meter long and 18.60-meter-wide vessels.The L-Drive variant or “embedded L-Drive” significantly reduces the installation height of the thrusters…

Becker Marine Systems Introduces New Wind-Assist Steering Technology

Becker Marine Systems introduced two new products at SMM which are designed to optimise vessel hydrodynamic performance: the Becker Daggerboard and the Becker Steering Gear.The Becker Daggerboard is an anti-leeway fin designed for ships equipped with modern wind- assisted propulsion systems (WAPS). When using WAPS, the desired thrust ahead components drive the ship. Depending on the wind direction, there can also be stronger or weaker lateral force components leading to leeway from the desired course.

Brunvoll to Supply Propulsion System for Norled’s Four New Ferries

Brunvoll has been chosen to supply azimuth propulsion thrusters and thruster control systems for Norled’s four next hybrid ferries.The vessels will service the routes between Stokkvågen, Lovund, and Træna in Norway. Designed by LMG Marin, the vessels will be built at the Tersan Havyard Shipyard.Norwegian ferry operator Norled has won the contract for the routes based on a 90% reduction in emissions.Each ferry will have a battery capacity of 8000 kWh, and therefore the largest battery capacity compared to other ferries in Norway.The routes support traffic between Stokkvågen and Lovund…

Konsberg to Equip Hybrid Chemical Tanker for Danish Operator

Kongsberg Maritime has secured a contract to design and a equip a 10th hybrid chemical tanker for Danish operator Tärntank.The new Tärntank vessels will reduce carbon emissions using a combination of clean technologies.The wind-assist technology will be installed on the latest four vessels ordered, and this feature alone is expected to reduce emissions by up to 19%. The new vessels will have an Energy Efficiency Design Index close to 40% below the 2025 Phase 3 requirements.The 15…

Berg to Supply Propulsion Kit for LDA's Wind-Assisted Airbus RoRos

Berg Propulsion has won a contract to deliver the hybrid propulsion solution for three wind-assisted Louis Dreyfus Armateurs (LDA) Ro-Ro vessels.Following delivery by China’s Wuchang Shipbuilding from 2026 onwards, the innovative vessels will carry Airbus A320 Family jetliner subassemblies from France to the final assembly line in the United States.The ships have been designed by Deltamarin with the aim of halving fuel burn and CO2 emissions in transatlantic operations by 2030…

Wärtsilä Set to Deliver Emissions-Cutting Tech for CMA CGM Ferries

Technology group Wärtsilä has secured a deal to supply engines, fuel gas supply system and thrusters for two new Ropax ferries being built for French operator La Méridionale, a subsidiary of CMA CGM.The vessels, which have been specifically designed to minimize emissions, are to be built at the China Merchants Jinling Shipyard (Weihai), and will operate between Marseille and Corsica.For each ship, Wärtsilä will supply two 12-cylinder, one 10-cylinder and one 8-cylinder Wärtsilä 31DF engines.The two ferries will benefit from Wärtsilä’s NextDF technology…

MOL to Install Wind Powered Propulsion Systems on Seven New Vessels

Mitsui O.S.K. Lines (MOL) and its company MOL Drybulk have announced plans to install wind propulsion systems, including Wind Challenger, on a total of seven newbuilding bulk carriers and multi-purpose vessels.The vessels will be operated by MOL Drybulk. With the latest commitment, MOL Group will have a total of nine Wind Challenger-equipped vessels, bringing the total number of vessels equipped with wind propulsion systems to 11.Among the seven vessels to be equipped with wind propulsion systems…

Flawed Propeller Blade Caused Containership to Lose of Propulsion -NTSB

A containership transiting the Pacific Ocean lost hydraulic oil and propulsion after its propeller blade cracked, according to a report from the National Transportation Safety Board (NTSB). A blade on the vessel’s controllable pitch propeller system did not meet manufacturer design specifications, the investigation found.The Matson containership Maunalei was travelling to Portland, Ore., from Anchorage, Alaska on August 11, 2022, for drydock repairs when the crew intentionally shut down the main engine due to problems in the controllable pitch propeller system…

Efficiency Gains from Eliminating the Hub Vortex

There is hydrodynamic solution that delivers multiple benefits for ship owners facing increasingly tough regulatory requirements and rising operational costs, writes Dr. Batuhan Aktas*One area of ship operations that has attracted much attention in recent years due to the possibilities it represents for emissions reduction is that of cavitation. During ship operations, cavitation occurs because of vortices that build up and cause bubbles to collapse under the ship’s propeller. The results of this process include increased noise, vibration and energy usage.

Brunvoll to Equip REM Offshore's Next-Gen Subsea Construction Vessel

Brunvoll has signed a contract with Myklebust Verft shipyard for the delivery of a thruster package to REM Offshore’s new energy subsea construction vessel (ESCV).The contract is for one vessel with an additional vessel as an option.Brunvoll will deliver a thruster package consisting of two propulsion azimuth thrusters, two retractable azimuth thrusters, and a tunnel thruster.One of the retractable azimuth thrusters is a newly developed and more compact version of Brunvoll’s traditional azimuth combi thrusters…

Stena’s Ro-Pax Vessel with Wärtsilä Propellers Obtains DNV Silent Operations Notation

Stena’s new Ro-Pax vessel, Ala’suinu, equipped with Wärtsilä propellers has received DNV’s Silent(E) notation, issued to vessels that demonstrate the ability to effectively reduce emissions of underwater radiated noise.Technology group Wärtsilä has designed and delivered controllable pitch propellers for Stena’s new Ro-Pax vessel, Ala’suinu, which has successfully completed sea trials.Following these sea trials, Ala’suinu became the first Ro-Pax vessel to fulfil the DNV Silent(E) notation…

Brunvoll System to Propel Cyan Renewables New SOV

Brunvoll has signed a contract with Vard for the delivery of a comprehensive propulsion and maneuvering system for Cyan Renewables' new Service Operation Vessel (SOV).The vessel will have the first azimuth propulsion thrusters from Brunvoll with an 8-degree tilted propeller and nozzle, for enhanced performance during dynamic positioning operations.The delivery for the new SOV consists of two azimuth propulsion thrusters, two retractable azimuth thrusters, a tunnel thruster, and…

Guangzhou Port Group’s e-tug to Sport Schottel Propulsion

SCHOTTEL will equip Guangzhou Port Group’s latest e-tug with two RudderPropellers type SRP 360 in the LE-Drive variant. The new harbor tug measures 37.9 x 10.5m and will be mainly used for berthing assistance, escorting and towing in the Port of Guangzhou, China. Each SRP has an input power of 1,500 kW and a propeller diameter of 2.2m. The 360-degree steerable thruster combines maximum maneuverability and bollard pull with outstanding efficiency during free sailing, providing…